Storefront Window Installation in Houston, TX | Commercial Glass Storefronts
Houston Windows Replacement & Repair Pros handles storefront window installation in Houston, TX, for retailers, restaurateurs, franchise owners and property owners who treat the glass front as their best piece of advertising. Our crews have built fronts for 20 years along shopping streets as different as 19th Street in the Heights, Rice Village and the Asiatown stretch of Bellaire Boulevard, where a clear view into the shop decides whether passersby walk in.
Houston's sun complicates that goal, since west-facing bays in a strip center take hours of direct afternoon glare, and our estimators recommend glass by exposure, pairing high visible light with solar control to keep displays bright and merchandise unfaded. Security gets equal attention, with laminated glass available for jewelers, pharmacies and phone stores that worry about smash-and-grab theft after closing, and tempered glass standard at every door.
Stocking common framing in clear, bronze and black finishes at our shop shortens lead times, a real advantage for owners racing toward an opening date in CityCentre, Sugar Land Town Square or Pearland Town Center.
Get a FREE Quote
#1 Most Trusted Window Professionals in Houston

Commercial storefront window installation gives retail shops, salons, clinics and office suites the glass front that customers see before anything else.
The workhorse system is a 2-inch by 4 1/2-inch aluminum frame holding 1-inch insulated glass, and our storefront installers specify tempered glass for any large lite that sits within 18 inches of the floor, as the International Building Code requires.
Tenants get clear sightlines to their displays, a weather-tight entrance and glass that passes inspection the first time.

New-construction storefront window installation depends on timing, since the glass front goes in after the masonry and roof are complete but before interior finishes begin.
Our project managers field-measure every opening once the structure is up instead of trusting the drawings, and they check that the header above meets the L/175 deflection limit the building code sets for framing that supports glass.
That sequence prevents the 2 problems that plague new storefronts, glass ordered to the wrong size and frames squeezed by a sagging lintel.

Frameless storefront window installation removes the vertical metal altogether, leaving 1/2-inch or 3/4-inch tempered glass held by slim top and bottom rails, patch fittings and clear silicone joints.
Houston Windows Replacement and Repair Pros sets these heavy lites with glass fins for bracing on tall spans and concealed floor closers from hardware makers like dormakaba and C.R. Laurence.
Boutiques, car showrooms and hotel lobbies choose the look for its uninterrupted view, and a 10-inch bottom rail on the doors keeps the entrance within accessibility rules.

Custom storefront window installation covers fronts that depart from a flat wall of rectangles, such as recessed vestibules, angled display bays, curved glass and automatic sliding entrances.
Our entrance specialists lay out each design from shop drawings, fit power-operated doors to the ANSI/BHMA A156.10 safety standard and add ceramic frit patterns or signage bands where the brand calls for them.
A front built around the tenant's layout pulls foot traffic toward the door and gives the business a face that differs from every other bay in the center.

Aluminum storefront window installation remains the default for Houston retail because the framing is light, quick to assemble and priced below every alternative.
Our storefront glaziers assemble the frames with screw-spline or shear-block joints, add water deflectors at each horizontal to steer rain toward the weeps, and finish the metal in clear, bronze or black anodizing.
Landlords value how easily a damaged aluminum section or lite gets swapped years later, which keeps repair bills low across a whole shopping center.

Steel-framed storefront installation trades the low cost of aluminum for strength, with profiles roughly 3 times stiffer that carry tall glass on very thin sightlines.
Restaurants and lofts in converted warehouses favor the industrial look, and our metal fabricators install galvanized, powder-coated steel systems that also accept fire-protective glazing tested under NFPA 257.
Our commercial window replacement and installation team recommends steel where a rated wall, a large span or a historic facade demands it, and aluminum everywhere else to protect the budget.
Our Houston Windows Replacement & Repair Pros layout crew snaps chalk lines and shoots the opening with a laser level. Door locations, mullion spacing and sill height get marked on the slab.
Sill flashing with sealed ends goes down first. Perimeter surfaces get cleaned and primed where the sealant will bond.
Our installers assemble the verticals and horizontals on site, then anchor the frame at the head, sill and jambs. Door frames get checked for square twice.
Each lite rests on 2 setting blocks at the quarter points. Roll-in gaskets hold the glass, and our crew confirms the weep slots are clear.
Closers, pivots and thresholds get tuned until the doors latch gently. Protective film comes off, and the glass gets its first cleaning.
Storefront window installation pricing runs by the square foot, so a quick calculation gives a starting point. Projul puts installed storefront glazing at $25 to $60 per square foot nationally, which works out to $5,000 to $12,000 for a front 20 feet wide and 10 feet tall.
Storefront costs less per square foot than other glazed framing systems because it faces lighter wind, water and thermal demands, according to a National Glass Association course. A separate continuing education course published by BNP Media puts field-fabricated curtain wall at about 40% to 60% above storefront, which is why single-story fronts rarely justify the heavier system.
Cost item | Typical price |
|---|---|
Storefront glazing, installed | $25 to $60 per square foot |
Example front, 20 feet by 10 feet (200 square feet) | $5,000 to $12,000 |
Field-fabricated curtain wall | About 40% to 60% more than storefront |
Factory-glazed curtain wall | Up to twice the cost of storefront |
Within the storefront range, entrance doors, insulated or laminated glass, custom finishes and tall spans push a project toward the upper end.
Houston Windows Replacement and Repair Pros prices each front after measuring the opening, because the width, height, door count and glass choice differ for every Houston tenant space.
Storefront doors sag when frames go in out of square. Ours get checked twice and adjusted again after 30 days.
Most storefront leaks start at the sill. Our crews flash and seal that joint before any framing goes up.
Our Houston Windows Replacement & Repair Pros team coordinates with sign companies and film installers. Glass sizes and mullion lines fit the branding from day 1.
The crew that built your storefront also repairs it. A broken lite or dragging door gets handled without a new contractor.
A standard front goes in over 1 to 3 days once materials arrive. Stocked finishes shorten the wait before that, which keeps Houston, TX tenants on track for their opening dates.
Yes, we do. Laminated security glass, heavier framing and reinforced door hardware are all available, and our estimators tailor the package to what your Houston, TX shop sells and when it sits empty.
Yes. Our crews remove the existing front, rework the opening where needed and install a new layout with different door positions, taller glass or slimmer framing for your Houston, TX space.
A National Glass Association course describes storefront systems as designed for mullions spaced 4 to 5 feet apart and spans up to 10 to 12 feet. Taller fronts need heavier framing, which our estimators size for you.
Clear glass sells merchandise best, and a low-E coating controls heat without darkening the view. Tint makes sense for offices and clinics wanting privacy, and our team mocks up both against your display window.
Clean the glass and frames regularly, keep the weep slots clear and have the door closers adjusted yearly. Sealant joints last roughly 10 to 20 years, and our crew inspects them during any service call.
Call Houston Windows Replacement and Repair Pros with your suite address and opening date. Our estimators measure the front, review framing and glass options and return a written price.